Automotive plastic parts, injection moulded in India
Premier Plasmotec injection moulds plastic parts for India’s car, scooter and motorcycle makers. We run 410 machines, from 50 to 1,600 tonnes, across 9 plants in 6 locations. Give us the A-surface and we design the rest of the part to your guidelines, for your approval. Because we are also the ones who mould it, we design out aesthetic defects and late engineering changes before you sign off. We then manage the mould build, mould the part in almost any engineering grade, and finish and check it ourselves. Our group has supplied the auto industry since 1997 and made plastic parts since 1979.
Send us your A-surface or drawing and your annual volume.
Email info@plasmotec.com
At a glance
| Item | Detail |
|---|---|
| Presses | 410 injection moulding machines, 50 to 1,600 tonnes |
| Thermoset | 15 thermoset moulding machines, 120 to 250 tonnes, for engine parts such as carburettor insulators |
| Materials | ABS, PP (unfilled, talc-filled, glass-filled), nylon 6, 66 and 46 including 30% glass-filled, PC, PC/ABS, flexible PVC, POM, PA6/PP alloy, TPE and other engineering grades, plus glass- and mica-filled phenolic for thermoset parts |
| Design | Part design from your A-surface: we develop the B-surface to your guidelines, for your approval, and design out aesthetic defects and late engineering changes · 10 design engineers · mould-flow simulation on every new design · three models in mass production for two OEMs, one passenger vehicle and one two-wheeler maker |
| Tooling | 200+ moulds a year from our own tool room, typically 45 to 60 days each: see our tool room page |
| Finishing | Metallizing, pad printing, decals, vacuum forming, EPS moulding, hot-plate and ultrasonic welding, assembly |
| Plants | 9 plants: Faridabad and Palwal (3), Kharkhoda, Tapukara and Salarpur (2), Bangalore, Mysore, Hosur |
| Quality | IATF 16949 at Faridabad, Bangalore and Hosur · PPAP to your requirements: see our certificates |
| Scale | More than 1 million components shipped a day |
How your part is made
- 01
Your drawing
Send your A-surface or drawing, the material and your annual volume. We review it for feasibility before any steel is cut.
- 02
Mould design and build
The mould is designed with mould-flow simulation and built in our own tool room in Faridabad: 200+ moulds a year, typically 45 to 60 days to first trial.
- 03
Moulding
Your part runs on the right machine among our 410, from 50 to 1,600 tonnes, across 9 plants.
- 04
Assembly and checks
Parts are finished, assembled and checked on the line. Dimensions are checked on CMMs and profile projectors, and we submit PPAP to your requirements.
- 05
Packed and dispatched
More than 1 million parts leave our plants every day for India's vehicle makers.
What we mould
Parts for cars, scooters and motorcycles. A selection from current and past programmes:
Passenger vehicles
- Engine and under-hood parts: air-intake filter housings, intake-manifold parts, oil-pan covers
- Interior parts: instrument-panel garnishes, under-IP covers, pillar and scuff trims, console parts, louvre garnishes
- Exterior and underbody parts: bumper parts and braces, grilles, fender and splash covers, underbody covers, battery-pack covers for electric cars, fog-lamp bezels, headlamp housings for lighting makers
Scooters and motorcycles
- Engine parts: cylinder-head covers, converted from metal to plastic, cam-chain guides and tensioners, oil-level gauges, engine-sprocket covers, drive-chain covers, carburettor insulators (thermoset)
- Frame and body parts: frame parts, muffler protectors, fuel-cock levers, battery boxes, fork covers, knuckle and sari guards, footrests, fenders, floorboards, inner leg shields, front cowls, body panels, luggage boxes, seat bases, handle grips, throttle housings, instrument-cluster covers
- Wheel hub parts: speedometer gears and pinions
Beyond auto
Bathroom fittings for Kohler: see our bathroom fittings page. Toys.
Fuel tanks and HVAC ducts are blow moulded: see our blow moulding page. Air cleaners and visors have their own pages: air cleaner page · visor page.
Thermoset moulding for parts next to the engine
Some parts sit right against engine heat, so we mould them in thermoset. Unlike a thermoplastic, a thermoset cures permanently in a heated mould and does not soften when it gets hot again, so it keeps its shape and its clamping load next to a running engine. We run 15 thermoset moulding machines, 120 to 250 tonnes, making carburettor insulators in glass- and mica-filled phenolic resin.
From your A-surface to mass production
Give us the A-surface, the styled face your designers have signed off, and our 10 design engineers design everything behind it to your design guidelines: the B-surface, with its ribs, bosses, clips, wall thickness, draft and gate positions. We run mould-flow simulation on every new design to check for sink marks, warpage, weld lines and short fills before it goes to you for approval, so defects are designed out instead of found at the first trial. You approve the design and you own it. Because we will mould the part, it is our job to make sure it needs no engineering change once tooling starts. We have taken three models from A-surface to mass production this way, for two OEMs: a passenger vehicle maker and a two-wheeler maker.
Our own tool room builds 200+ moulds a year, typically in 45 to 60 days: see our tool room page.
Finished parts, not raw mouldings
Most parts leave our plants finished: metallized, pad printed or decorated with decals, hot-plate or ultrasonically welded, and assembled into sub-assemblies where you need them. Vacuum-formed and EPS parts come from the same plants. You deal with one supplier and one PPAP for the finished component.
How a new part comes to production
- Part design: from your A-surface we design the B-surface to your guidelines, check material, wall thickness, draft, gates and parting line for moulding and aesthetic defects, and submit it for your approval.
- Mould design and build, typically in 45 to 60 days.
- First trial, with samples measured on a CMM or 3D scanner.
- Corrections and re-trials until the part matches the drawing.
- PPAP submission and series production.
- Delivery from the plant nearest your line.
Quality and testing
Parts are measured on CMMs, 3D scanners and profile projectors in our plants. Our Faridabad, Bangalore and Hosur plants are certified to IATF 16949, and we submit PPAP to your requirements. Our customers have given us more than 25 awards for quality, delivery and development since 2014.
Where we mould
Two clusters, north and south, so parts ship from a plant near your line:
- Faridabad and Palwal, Haryana: 3 plants and the tool room, in the NCR vehicle cluster
- Kharkhoda, Haryana: opened in 2024
- Tapukara and Salarpur, Rajasthan
- Bangalore, Karnataka
- Mysore, Karnataka
- Hosur, Tamil Nadu
See all locations on our plants page.
Why Premier Plasmotec
- 410 machines from 50 to 1,600 tonnes: one supplier from small clips to large body panels
- Part design from your A-surface, proven on three models in mass production for a passenger vehicle maker and a two-wheeler maker, backed by our own tool room
- Finishing and assembly in the same plants as moulding
- An automotive supplier since 1997, in a group making plastic parts since 1979
- More than 1 million components shipped a day
- Customers include Maruti Suzuki, Honda, Hero MotoCorp, TVS Motor, Suzuki Motorcycle India and Royal Enfield
Questions buyers ask
What tonnage range do you have? 410 machines from 50 to 1,600 tonnes, plus 15 thermoset machines from 120 to 250 tonnes.
Which materials do you mould? ABS; PP in unfilled, talc-filled and glass-filled grades; nylon 6, 66 and 46, including 30% glass-filled; PC; PC/ABS; flexible PVC; POM; PA6/PP alloy; TPE; and other engineering grades. For thermoset parts we mould glass- and mica-filled phenolic.
Can you design the part from our A-surface? Yes. We design the B-surface to your design guidelines and check it for moulding and aesthetic defects before you approve it, so no engineering change is needed once tooling starts.
Who owns the design data? You do. We design to your guidelines, and the approved design and its data are yours.
Do you paint parts? Not in-house today.
Talk to us
Email info@plasmotec.com. Send the drawing or 3D model, material, annual volume and start-of-production date.

