Blow moulded fuel tanks and HVAC ducts, made in India
Premier Plasmotec blow moulds HDPE fuel tanks for two-wheelers at our Faridabad and Mysore plants, and HVAC ducts for passenger cars at our Tapukara plant in Rajasthan. We have made blow moulded (blow molded) automotive parts since 2021, using fuel-tank technology from a Japanese partner. Our group has supplied India’s vehicle makers since 1997.
Send us a drawing and your annual volume.
Email info@plasmotec.com
At a glance
| Item | Detail |
|---|---|
| Parts | Fuel tanks, HVAC ducts |
| Material | HDPE |
| Largest part | 5 to 60 litres |
| Machines | 17 blow moulding machines |
| Tooling | Blow moulds designed and built in our Faridabad tool room |
| Plants | Fuel tanks: Faridabad, Haryana · Mysore, Karnataka. HVAC ducts: Tapukara, Rajasthan |
| Quality | Certificates listed by plant on our quality page · PPAP to your requirements |
| Group | 9 plants · more than 1 million components shipped a day |
How a tank is blow moulded
- A tube of hot HDPE, the parison, drops from the head.
- The two mould halves close around it.
- Air blown inside presses the plastic against the mould and forms the tank.
- The mould opens and the tank comes out for trimming and leak testing.
Fuel tanks
HDPE fuel tanks for scooters and motorcycles. We mould the tank, leak test it and supply it ready to fit on your line.
HVAC ducts
Front and rear AC ducts and vent ducts for passenger cars, shaped to fit around the dashboard and floor, and blow moulded at our Tapukara plant in Rajasthan.
One supplier for the whole assembly
The parts around a tank or duct are usually injection moulded: brackets, covers, clips and caps. We make those too, in the same plants. You get one supplier, one PPAP and one point of responsibility for the assembly.
How a new part comes to production
- Drawing review: we check wall thickness, parting line, necks and mounting points, and tell you what should change before tooling.
- Mould design and build in our own tool room, typically in 45 to 60 days.
- Validation: leak test, dimensional check and the functional tests your specification calls for.
- PPAP submission and series production.
- Delivery from the plant nearest your line.
Quality and testing
Our fuel-tank lab runs burst, weld-strength, separation-strength, volume and contamination tests. Dimensions are checked on a CMM and on checking fixtures. Our certificates are listed by plant on our quality page, and we submit PPAP to your requirements.
Where we make them
- Fuel tanks: Faridabad, Haryana, in the NCR vehicle cluster
- Fuel tanks: Mysore, Karnataka, near the southern two-wheeler and car plants: 517P, 518P and 520P, Thandya 2nd Phase Industrial Area, Thandavapura, Chikkayanachathra Hobli, Mysore, Karnataka 571302
- HVAC ducts: Tapukara, Rajasthan: Plot No. B-6, RIICO Industrial Area Karoli, Tapukara, Bhiwadi, Alwar, Rajasthan 301707
Why Premier Plasmotec
- An automotive supplier since 1997, in a group making plastic parts since 1979
- 9 plants and more than 1 million components shipped a day
- Our own tool room since 2002, so mould changes don’t wait on an outside toolmaker
- Customers include Maruti Suzuki, Honda, Hero MotoCorp, TVS Motor, Suzuki Motorcycle India and Royal Enfield
Questions buyers ask
What do you blow mould? HDPE fuel tanks and HVAC ducts.
How large a part can you make? From 5 to 60 litres.
Do you make the moulds yourselves? Yes, in our Faridabad tool room.
Do you supply outside India? Yes.
Talk to us
Email info@plasmotec.com. Send the drawing, material, annual volume and start-of-production date.

